|
|
Products 5301 to 5350 of 5366
|
| 0106568 |
|
| Chainplate for Stb Aft Lower and Intermediate Shrouds on a 1979 CSY 37 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,325.93
Each |
|
| 0106569 |
|
| Forestay Chainplate for a 1979 CSY 37 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Sandblasted Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,169.42
Each |
|
| 0106570 |
|
| Forestay Chainplate for a 1979 CSY 37 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,482.00
Each |
|
| 0106571 |
|
| Backstay Chainplate for a 1979 CSY 37 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Sandblasted Finish |
|
Marine |
Rigging Parts /
Chainplate |
481.58
Each |
|
| 0106572 |
|
| Backstay Chainplate for a 1979 CSY 37 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
576.73
Each |
|
| 0106573 |
|
| Chainplate for Port Aft Lower and Intermediate Shrouds on a 1979 CSY 37 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Sandblasted Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,233.22
Each |
|
| 0106574 |
|
| Chainplate for Aft Port Lower and Intermediate Shrouds on a 1979 CSY 37 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,325.93
Each |
|
| 0106640 |
|
| 1/4-20 X 1-3/4 inch UNC Allied Titanium Stud with 1/16 inch of unthreaded shank 0.182 inch diameter, Grade 2 (CP) Titanium with Polished Finish |
|
Fasteners |
Fastener, Stud /
Stud |
Call (302) 249-3295 |
|
| 0106670 |
|
| 51.5 Gallon Allied Titanium Waste (Holding) tank for Skoolie (RV) 430mm (17 in.) X 498mm (20 in.) X 1000mm (39-3/8 in.) with 3 inch female NPT Outlet, Grade 2 (CP) Titanium with Mill Finish |
|
Marine |
Tank /
Waste Tank |
Call (302) 249-3295 |
|
| 0106671 |
|
| 3 inch Allied Titanium FNPT weld on Female Pipe fitting, 0.630 X 4 inches, Grade 2 (CP) Titanium with Mill Finish |
|
Marine |
Pipe Fitting /
Pipe Fitting, Weld on |
Call (302) 249-3295 |
|
| 0106673 |
|
| Allied Titanium Straight Hex Nipple, 3 inch NPT X 3-3/4 inches long, Grade 2 (CP) Titanium with Polished Finish |
|
Marine |
Pipe Fitting /
Straight Hex Nipple |
Call (302) 249-3295 |
|
| 0106674 |
|
| 3 inch NPT X 2-5/8 Allied Titanium NPT weld on Pipe fitting, Grade 2 (CP) Titanium with Mill Finish |
|
Marine |
Pipe Fitting /
Pipe Fitting, Weld on |
Call (302) 249-3295 |
|
| 0106675 |
|
| 53.5 Gallon Allied Titanium Waste (Holding) tank for Skoolie (RV) 430mm (17 in.) X 498mm (20 in.) X 1042mm (41 in.) with 3 inch male NPT Outlet, Grade 2 (CP) Titanium with Mill Finish |
|
Marine |
Tank /
Waste Tank |
Call (302) 249-3295 |
|
| 0106676 |
|
| 51.5 Gallon Allied Titanium Fresh Water tank for Skoolie (RV) 430mm (17 in.) X 498mm (20 in.) X 940mm (37 in.) with 1/2 inch female NPT inlets and outlet, Grade 2 (CP) Titanium with Mill Finish |
|
Marine |
Tank /
Water Tank |
Call (302) 249-3295 |
|
| 0106677 |
|
| 53.5 Gallon Allied Titanium Fresh Water tank for Skoolie (RV) 430mm (17 in.) X 498mm (20 in.) X 1000mm (39-3/8 in.) with 1/2 inch female NPT inlets and outlet, Grade 2 (CP) Titanium with Mill Finish |
|
Marine |
Tank /
Water Tank |
Call (302) 249-3295 |
|
| 0106678 |
|
| 43 Gallon Allied Titanium Fresh Water tank for Skoolie (RV) 430mm (17 in.) X 498mm (20 in.) X 813mm (32 in.) with 1/2 inch female NPT inlets and outlet, Grade 2 (CP) Titanium with Mill Finish |
|
Marine |
Tank /
Water Tank |
6,982.61
Each |
|
| 0106680 |
|
| 3 Inch Schedule 40 Pipe, Seamless, Grade 2 (CP) Titanium with Mill Finish |
|
Mill Product |
Mill Product, Rolled /
Flat Head, Square Drive Machine Screw |
58.05
Pound |
|
| 0106690 |
|
| Allied Titanium Chainplate with 5 degree angle and 3/8-24 studs for upper shrouds on a 1977 Camper Nicholson 31, Grade 5 (Ti-6Al-4V) Titanium with Mill Finish |
|
Marine |
Rigging Parts /
Chainplate |
749.88
Each |
|
| 0106691 |
|
| Allied Titanium Chainplate with 15 degree angle and 5/16-24 studs for lower shrouds on a 1977 Camper Nicholson 31, Grade 5 (Ti-6Al-4V) Titanium with Mill Finish |
|
Marine |
Rigging Parts /
Chainplate |
691.44
Each |
|
| 0106692 |
|
| Allied Titanium Chainplate with 5 degree angle and 3/8-24 studs for upper shrouds on a 1977 Camper Nicholson 31, Grade 5 (Ti-6Al-4V) Titanium with Mill Finish |
|
Marine |
Rigging Parts /
Chainplate |
565.64
Each |
|
| 0106693 |
|
| Allied Titanium Chainplate with 15 degree angle and 5/16-24 studs for lower shrouds on a 1977 Camper Nicholson 31, Grade 5 (Ti-6Al-4V) Titanium with Mill Finish |
|
Marine |
Rigging Parts /
Chainplate |
413.96
Each |
|
| 0106711 |
|
| 1-1/4 X 29-3/4 Allied Titanium Floating Pump Handle for 1 Inch Female Receiver on Pump, Mixed Titanium with Mill Finish |
|
Marine |
Hardware /
Handle |
513.51
Each |
|
| 0106773 |
|
| Allied Titanium Lifting Ring 3/8 X 3-3/4 inch ID X 4-1/2 inch OD, Machined from solid round bar stock, Grade 5 (Ti-6Al-4V) Titanium with Machined Finish |
|
Marine |
Rigging Parts /
Lifting Ring |
172.43
Each |
|
| 0106796 |
|
| Allied Titanium 26 Kg Titan Anchor, Fluke Area = 295 square inches (190,561 square mm), Grade 2 (CP) Titanium with Satin Finish |
|
Marine |
Ground Tackle /
Anchor |
7,160.55
Each |
|
| 0106797 |
|
| Allied Titanium Straight Pipe Nipple, 1/2 inch NPT X 3 inches long, Schedule 40, Grade 2 (CP) Titanium with Mill Finish |
|
Marine |
Pipe Fitting /
Straight Nipple |
Call (302) 249-3295 |
|
| 0107054 |
|
| Taswell 56 Chainplate (15mm X 5 inches X 21.31 inches), Grade 5 (Ti-6Al-4V) Titanium with Sandblasted Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,683.70
Each |
|
| 0107060 |
|
| Allied Titanium Lifting Ring 3/8 X 2-3/4 inch ID X 3-1/2 inch OD, Machined from solid round bar stock, Grade 5 (Ti-6Al-4V) Titanium with Machined Finish |
|
Marine |
Rigging Parts /
Lifting Ring |
Call (302) 249-3295 |
|
| 0107061 |
|
| Taswell 56 Deckplate (7 Inches X 2.625 X 0.125), Grade 5 (Ti-6Al-4V) Titanium with Sandblasted Finish |
|
Marine |
Rigging Parts /
Deck Plate |
Call (302) 249-3295 |
|
| 0107067 |
|
| Allied Titanium Straight Pin 1/8 X 0.66 Grip length, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Fasteners |
Fastener, Pin /
Clevis Pin, Normal |
5.92
Each |
|
| 0107080 |
|
| Fuel tank for 20' / 21' Boca Grand, 62 Gallon (58.1 GAL NOM.) Gas Tank, Grade 2 (CP) Titanium with Mill Finish |
|
Marine |
Tank /
Fuel Tank |
Call (302) 249-3295 |
|
| 0107098 |
|
| Allied Titanium Gammon Iron Plate for 1982 Mao Ta 36' Cutter (Starboard Side), Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
2,118.94
Each |
|
| 0107101 |
|
| Allied Titanium Bobstay Plate with padeye (2 holes for 3/4 inch Clevis Pins) for a Hallberg-Rassy 41 using 3/8 inch Flat Head Socket Drive Screws, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Bobstay Plate |
1,050.43
Each |
|
| 0107102 |
|
| Allied Titanium Gammon Iron Plate for 1982 Mao Ta 36' Cutter (Port Side), Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
2,118.94
Each |
|
| 0107106 |
|
| Port Forward Allied Titanium Chainplate for 1982 Mao Ta 36 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,435.32
Each |
|
| 0107109 |
|
| Allied Titanium Bobstay Plate with padeye (2 holes for 3/4 inch Clevis Pins) for a Hallberg-Rassy 41 using 3/8 inch Bolts, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Bobstay Plate |
1,088.29
Each |
|
| 0107110 |
|
| Starboard Forward Allied Titanium Chainplate for 1982 Mao Ta 36 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,435.32
Each |
|
| 0107111 |
|
| Port Midship Allied Titanium Chainplate for 1982 Mao Ta 36 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,435.32
Each |
|
| 0107112 |
|
| Starboard Midship Allied Titanium Chainplate for 1982 Mao Ta 36 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,435.32
Each |
|
| 0107113 |
|
| Port Aft Allied Titanium Chainplate for 1982 Mao Ta 36 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,885.24
Each |
|
| 0107114 |
|
| Starboard Aft Allied Titanium Chainplate for 1982 Mao Ta 36 Cutter, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,885.24
Each |
|
| 0107125 |
|
| Strap Style Allied Titanium Eye - Jaw Toggle for 5/8 inch clevis pin, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Eye Jaw Toggle |
754.76
Each |
|
| 0107129 |
|
| Stemplate for 1973 Ericson 29, Grade 5 (Ti-6Al-4V) Titanium with Mill Finish, Grade 5 (Ti-6Al-4V) Titanium with Mill Finish |
|
Marine |
Rigging Parts /
Chainplate |
Call (302) 249-3295 |
|
| 0107166 |
|
| Allied Titanium Chainplate Assembly with 12 inch glassing strap for the Mid and Upper Shrouds on an Island Packet 44 (1/2 X 3-3/8 X 8-7/16 inches with 10 degree bend), Grade 5 (Ti-6Al-4V) Titanium with Satin Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,557.44
Each |
|
| 0107172 |
|
| Allied Titanium Chainplate Assembly with 12 inch glassing strap for the Aft Lower and Mid Shrouds on an Island Packet 44 (1/2 X 3-3/8 X 8-7/16 inches with 20 degree bend), Grade 5 (Ti-6Al-4V) Titanium with Satin Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,557.44
Each |
|
| 0107173 |
|
| Allied Titanium Chainplate Assembly with 12 inch glassing strap for the Forward Lower Shrouds on an Island Packet 44 (1/2 X 1-1/2 X 8-7/16 inches with 20 degree bend), Grade 5 (Ti-6Al-4V) Titanium with Satin Finish |
|
Marine |
Rigging Parts /
Chainplate |
1,005.15
Each |
|
| 0107174 |
|
| Allied Titanium Backstay Plate Assembly with 12 inch glassing strap on an Island Packet 44 (3/8 X 1-1/2 X 8-7/16 inches with 30 degree bend), Grade 5 (Ti-6Al-4V) Titanium with Satin Finish |
|
Marine |
Rigging Parts /
Chainplate |
881.87
Each |
|
| 0107218 |
|
| 1/4 inch X 1/4 inch X 1-1/2 inch Allied Titanium Standard Key Stock, Grade 5 (Ti-6Al-4V) Titanium with Machined Finish |
|
Hardware |
Hardware /
Key Stock |
8.21
Each |
|
| 0107222 |
|
| 3/4-16 SAE 8 Straight Thread Allied Titanium Male Port to 5/8 inch Hose Adapter with groove for o-ring (FULL DFAR), Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Pipe Fitting /
Hose to Male Pipe Adapter |
158.34
Each |
|
| 0107223 |
|
| 5/16-24 SAE 2 Straight Thread Allied Titanium Hex Head Port Plug with groove for o-ring, Grade 2 (CP) Titanium with Polished Finish |
|
Marine |
Pipe Fitting /
Hex Head Pipe/Port Plug |
Call (302) 249-3295 |
|
| 0107224 |
|
| 3/8-24 SAE 3 Straight Thread Allied Titanium Hex Head Port Plug with groove for o-ring, Grade 3 Titanium with Polished Finish |
|
Marine |
Pipe Fitting /
Hex Head Pipe/Port Plug |
Call (302) 249-3295 |
Products 5301 to 5350 of 5366
|
|
